A Very EBow Christmas!

Sustain that seasonal spirit!

WARNING: THIS POST CONTAINS HOLIDAY MATERIAL. THOSE WITH SEASONAL MUSIC ALLERGIES SHOULD CONSULT THEIR THERAPISTS BEFORE PROCEEDING.

Nothing says “Christmas morning” like an ugly piece of molded plastic with a battery inside! But unlike so many cheap plastic toys, the EBow is a treasure that can delight you for decades.

While racking my brain for a holiday post without too much bad attitude, it occurred to me that “Silent Night” makes a perfect little EBow exercise. If you play it in G, starting on the the 7th fret of the third string, the melody spans almost the entire range of the string. And it includes lots of those melodic leaps that are so tough to play smoothly on EBow. In other words, this simple, familiar tune is a serious workout!

Have a listen to the version I recorded, featuring my Lowden acoustic guitar and a Hamer 20th Anniversary with Seymour Duncan Antiquity PAFs:

Silent Night for acoustic guitar and EBow

Now, if you’re not an EBowmaniac, it probably doesn’t sound terribly impressive. The reason it’s challenging is because it’s voiced on one string. It’s easiest to perform if you use a single finger, simply sliding it from note to note. In other words, something like this:

Harsh EBow tone with noisy slides

That’s not necessarily a bad sound. But for the ambitious EBowist, moving beyond that “slide every note” approach is one of the first technical hurdles. It’s not the only one: beginning and ending ending notes cleanly and voicing melodies across multiple strings are also challenging. But those are topics for another holiday — the lesson here is playing the melody as legato (that is, smooth and connected) as possible, without audible slides between notes.

Some tips:

  • Always visualize of the next note you’ll note need to play, and be ready to shift your fretting-hand  fast at the last possible instant. Even though the “Silent Night” melody is as slow as congealed eggnog, it’s a real speed exercise!
  • Having a loose, stretchy fretting hand also helps. As an example, take the tune’s first four notes: The most intuitive fingering might be to play the first note at the 7th fret with your index finger, the next note at the 9th fret with your ring finger, back to the first note with the index finger, and then quickly sliding that finger down to the 4th fret for the fourth note. But that fingering makes it hard to play the third and fourth notes smoothly without sliding. Try this instead: Play the first note with your ring finger, stretch up with your pinky for the second note, return to the first note, and then while sustaining it, inch your index finger back toward the fourth fret. You may not be able to actually touch the fret in advance of sounding the note, but you can get close. (Take heart! After you’ve EBowed for a while, awkward fingerings like this start to feel more intuitive.)
  • EBow is almost always played using only the neck pickup. Most often, the EBow is positioned a bit toward the bridge side of the pickup, rather than directly over it.
  • The naked EBow tone, as heard in my second example, can be pretty harsh. It’s often a good idea to turn down your neck tone pot. In the first example, I’ve lowered the pot all all the way. That’s how you get that flute/clarinet-type timbre.
  • Adding a touch of delay and/or reverb can make your melodies sound a little more legato than they actually are.

Give it a go! And no swearing — it’s almost Christmas!

"But I asked Santa for a can opener! Well, at least I can play with the box."

 

13 comments to A Very EBow Christmas!

  • el reclusa

    Thanks for posting this!  Am I the only one that feels like an eBow should come with one’s first guitar?  Ebow, a good slide, and a capo should be standard issue!

    • joe

      I know! I have about a gazillion guitar toys, but the only things I really need are an EBow, a slide, a capo, and a couple of picks (for the occasional times I use ’em).

  • Hey Joe,

    Merry Christmas to you and your family, thank you for the gift of knowledge with your DIY projects this year, looking forward to what the new year brings.

    Cheers and be Merry!

  • Keith Parks

    How come they are still $100?  There’s been no R&D on them in 30 years.  But I might get another one.  They are fun to play with.  

    I love your articles – especially the breadboarding ones. I have done veros (with a 50% success rate) and pcb’s but never a perfboard or a breadboard.  Maybe it’s time to try it

    Anyway, take care and Happy Holidays to you and yours

    • joe

      LOL — I wish I had a 50% success rate when I started out! 😉

      I’m glad you’re digging it, Keith. Any particular DIY projects you’re interested in seeing?

      • Keith Parks

        I just finished a vero Electra type OD, but I noticed without the diode pair, it was a really nice booster with a little treble boost.  So I tried to put the diodes on a switch but couldn’t get it to work.  I think a boost that can switch into a light overdrive would be cool.  Or a Range Master type circuit.

  • I’ll admit to never using an EBow. However, this is a great tutorial for those who have a guitar with a sustainer built into it. I’d like to see you experiment with a sustainer and play it like a piano. Im not that good with using that many fingers on a fretboard at one time but I’m guessing you could pull off some tasty licks with all six strings sustaining.

  • jason

    Test comment from android device

  • I love my EBow. I picked mine up back in 1988 when they came back out on the market. They are fun little gadgets!

  • Oinkus

    Just ordered an Ebow had a 20% off coupon on MF , waiting impatiently for it to arrive. Trying to gather some info , been a century since I last touched one.

  • Oinkus

    Too much info to start with but actually the second switch setting (harmonic)was not part of the original version. I put in the disc and found out that I have to learn new techniques , found the Ebow website and watched some video. Now I need some tutorials and general how not to be obnoxious instructioning. There’s some blistering playing in the first bit of the demo that just sounds like it will always be beyond my abilities? So toss me some links and share some “how to” info guys.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

  

  

  

Click to upload a JPG

This site uses Akismet to reduce spam. Learn how your comment data is processed.