tonefiend.com

Category: guitar

  • The Pagey Project: Postscript

    The Pagey Project: Postscript

    Does this guitar LOOK like it has over a hundred settings?

    Just a quick follow-up on the Pagey project, which first recreated the original Jimmy Page wiring scheme, and then explored an even  more extreme version using Seymour Duncan Triple Shot Mounting Rings.

    Once I’d finished the project, I had to decide whether to keep the guitar heavily modded, or revert to something simpler. It probably won’t surprise you to hear I decided to keep the extreme Phase 2 wiring, with its added germanium overdrive.

    But as cool as the Duncan ’59 model pickups sounded, I wanted to revisit the Duncan Seth Lover pickups I’d previously had in the guitar. They’re bright — twangy, even — compared to the ’59s, and I like the midrange honk they add by virtue of being unpotted. (I’ve written about the pros and cons of potting here.)

    I’ve recorded an example of how the guitar sounds with the Seth Lovers. (You can’t make exact comparisons with the previous Pagey videos, since I used an amp for those, while the new examples were recorded through an amp simulator, though the “Seth” character still shines through.) I’ve included the clip in the post after/above this one, because it’s my first audio example using SoundCloud, and I wanted to say a few words about that.

    "There's GOLD in that thar pickup!"

    And call me shallow, but…I really dig the way my guitar looks with the Seth Lovers installed. Between the teensy switches on the mounting rings and the push/pull pots, you really have to look hard to tell the guitar is not merely non-stock — it’s a morbidly overdeveloped tweak machine.

    Funny — I’ve always found gold hardware a little bit tacky. But now I’m so enthusiastic about the look of gold that I feel like this guy at the right.

  • A Loop-Oriented Laptop Guitar Rig

    A Loop-Oriented Laptop Guitar Rig

    I haz a band.

    My ol’ pals at Guitar Player magazine interviewed me for an instructional article on looping for next month’s issue. It was especially flattering to be invited, because the interviewer was Barry Cleveland, a fine guitarist and a leading figure in the looping community.

    I put together this little video to demo the digital rig I use onstage with my duo band, Mental 99, and I’ve cross-posted it here. It covers software, hardware loopers, looping techniques, and the like. Have a listen.

    (more…)

  • The Pagey Project, Phase 2:An INSANELY Versatile Les Paul

    The Pagey Project, Phase 2:
    An INSANELY Versatile Les Paul

    Just how many colors can you coax from one guitar?

    This post is about a guitar wiring scheme that only geeks and tweakers could love.

    I think you’ll dig it. :satansmoking:

    In Phase 1 of this project, I recreated the original Page wiring scheme using an ’82 Paul, a pair of Duncan ’59 model pickups, and four push-pull pots. The result was a great-sounding, almost absurdly versatile guitar, though the sheer number of options was downright bewildering.

    So naturally, the only way forward was to make the instrument even more bewildering by adding additional sonic options. This version offers all the sound of the Phase 1 model, and a buttload more. Several buttloads, actually — and I’m not talking about those skimpy metric buttloads!

    I gutted all the Phase 1 electronics. (Man, that hurt!) Next, using the same pickups, I added a pair of Duncan Triple Shot Mounting Rings. These provide four settings per pickup: humbucker, inner coil split, outer coil split, and both coils in parallel. (The Phase 1 plan offers only one split-coil setting per pickups. While you can configure the two pickups in parallel, you can’t do so with the individual coils in each pickup like you can here in Phase 2.) Here’s the wiring diagram I worked from, which for some reason is no longer posted on the Duncan site.

    Since the Triple Shots add four new switches, the Phase 2 wiring requires only two push/pull pots. I wan’t about to let that real estate go unused! I installed a homemade germanium overdrive circuit (similar to the one we made in DIY Club) inside the guitar. My third push/pull pot activates it, and the fourth selects between two input caps, so I get a choice between a fat, Sabbath-style drive and a brighter, thinner Bluesbreakers-type tone.

    Check out the demo video:
    (more…)

  • A Modern Vari-Tone Alternative…

    Looks like a pot — but it's not!

    In the comments on my post on the Mongrel Strat with the Obsessive-Compulsive Tone Control, reader Dave mentioned a related product: The Stellartone ToneStyler. I ordered one and popped in into my dual-humbucker Hamer 20th Anniversary guitar (which still boasts the Seymour Duncan Joe Bonamassa pickup set I demoed here.)

    (Quick memory refresher: The Vari-Tone appeared in several historic Gibson guitars, notably the ES-345. It uses a half-dozen different-sized capacitors to alter the voicing of the tone pot. It also adds an inductor, which preserves lows while the capacitors remove highs. Result: the rolled-off settings have a somewhat piercing, nasal character, as opposed to the usual dark, wooly sound of a rolled-off tone pot.)

    Like some cool DIY versions of the project, the ToneStyler omits the inductor. And while it looks like a conventional tone pot,it’s actually a 16-position switch that selects between stepped capacitors, all of them smaller than in a conventional tone control. Result: rolled-off tones that maintain more volume and impact than in a conventional tone control.

    Have a listen:

    (more…)

  • Afrobeat Forever

    Afrobeat Forever

    The first good band I ever played in was led by Nigerian singer/saxophonist Orlando Julius Ekemode. I was an obsessive African pop fan, astonished to find myself playing afrobeat, highlife, and juju with a bunch of West African expats in Oakland, California. The crew included the great African music scholar C.K. Ladzekpo and Kwasi “Rocky” Dzidornu, who worked as a session player in London, where, among other things, he recorded the iconic conga track on the Stones’ “Sympathy for the Devil.” Other players had recorded with great West African artists such as King Sunny Ade, Hedzoleh Soundz, Sonny Okosuns, and the big kahuna of African funk, Fela Kuti.

    Orlando Julius — “O.J.” — was a kind bandleader who patiently coached me on how not to suck at the styles. I learned so much about time-keeping, note placement, and consistency. And if there’s a better consistency exercise than playing an unvarying one-bar pattern for a half-hour song, I can’t think of it.

    I haven’t performed literal afrobeat in many years, though I still find myself alluding to the style. In fact, I just nipped down to the studio and recorded this lick:

    The Quintessential Fela Kuti Lick

    …and it still makes me happy.  (more…)

  • The Pagey Project, Phase One!

    The Pagey Project, Phase One!

    Hey kids! You’re never too young to mod your guitars!
    Now get off my lawn.

    As promised, here are a demo video and tech notes for the first phase of the Pagey Project, which recreates Jimmy Page’s original Les Paul wiring scheme. (The upcoming Phase Two will expand on the idea with even more crazy options.)

    All I can say is, sheesh! Why did it take me decades to try out this awesome Les Paul mod?

    I think it’s because I had a nasty dual-humbucker guitar many years ago with series and coil-split switches. Even though I knew the pickups were crap, it still prejudiced me against alternate humbucker wirings. “Just pick up a Fender!” I’d think.

    Another factor: I lacked the sophistication to know that, while many of the tones unlocked by the Pagey wiring sound thin and/or weird on their own, they can be quite useful in context.

    And make no mistake — except for the series switch, all the alternate Page sounds are smaller than stock Les Paul sounds. And that’s a good thing! They’re great for crystalline clean tones, ratty faux-P-90 distortion, and simply making the regular Les Paul sounds seem gigantic by contrast.

    Have a listen. There video starts with a 90-second overview, then works through the system in detail: (more…)

  • The Pagey Project: Prelude

    The Pagey Project: Prelude

    Double the sounds available from your axe!

    Man, preparing the Pagey project has been a real eye-opener! Expect some surprising results! (Hint: There’s much of interest, even for players who have zero desire to sound like Page.)

    I’ll be posting the first video and tech walk-through after the weekend, but in the meantime, I wanted to update you on the game plan, which, frankly, only became clear once I started soldering.

    If you haven’t downloaded the relevant schematics, you can snag them here. (Reader Jeff pointed out pointed out a difference between the two versions of the four-push/pull wiring. I have no idea which version page used, but I went with the version from Scott Miller’s Guitar Player magazine article because it offers a bit more control — and this project is all about control!)

    We’re going to tackle the project in two phases. First, we’ll look at the original Pagey wiring, using four push-pull pots and period-accurate pickups (I went with Duncan ’59s with four-connector cable). I’ve wired up my ’82 Les Paul in exactly this fashion, and it’s pretty dang cool. Yes, it’s a complicated job, but not as tough as anticipated. Amazingly (for me) it turned out great on the first attempt. (more…)

  • This Charming Riff

    This Charming Riff

    Weird — back when I wrote this GP cover story, I never even noticed the Hello Kitty guitar!

    Maybe it’s because of the crescendo of chatter about a Smiths reunion, but I’ve had Johnny Marr on the brain lately. (Full disclosure: I am a total, drooling fan.) I keep coming back to how deceptively simple his parts are, with an emphasis on the “deception” part. There’s always much more happening than initially meets the ear.

    Perfect example: “This Charming Man,” the band’s first single. It’s always been my favorite Smiths guitar performance — even more than the apocalyptic tremolo and harmonizer work of “How Soon Is Now?” Maybe it’s because I’m still astounded by the originality and sheer chutzpah of the young guitarist, who was all of 19 when the track was released.

    “This Charming Man” is a perfect little pop guitar part, with an African highlife-inflected head and lots of pretty open-string chiming throughout. But the deeper you dig, the more you uncover. And you won’t believe what I uncovered during my latest Smiths geek-out: (more…)

  • The Ultimate Mongrel Strat? (with Obsessive/Compulsive Tone Control!)

    The Ultimate Mongrel Strat? (with Obsessive/Compulsive Tone Control!)

    Not for everybody: The sickest mongrel strat yet.

    Okay, I lied.

    In the previous installment of our ongoing mongrel strat series, I experimented with a version of Gibson’s oddball Vari-Tone circuit. I said it was too fussy and complex, and that I wanted to experiment with a simplified version.

    So naturally, I built a “parts” Strat with a Vari-Tone twice as complicated as the original — a configuration I’ve dubbed the “Obsessive/Compulsive Tone Control.” I also deployed some of my favorite quirks and wiring tricks from previous strat experiments, plus a few new hardware discoveries. Result: a weird-ass guitar that only a geek could love a cool, one-of-a-kind instrument.

    Check out the demo. Post-mortem after.
    (more…)

  • Nut Case

    Nut Case

    Better tools than I deserve: The Stew-Mac Essential Nut Making Tool Kit

    Not something I’d recommend to everyone, but…

    …as part of an ongoing series on mongrel/hybrid Strats, I’ve built a new Strat from parts to house all the cool little tricks and quirks I stumbled upon during the series. (Wait till you hear the “Obsessive/Compulsive Capacitance” tone control!) I’ll be doing a post on the guitar next week.

    Anyway, lazy slob perfectionist that I am, I usually take my instruments to my local guitar tech/genius Gary Brawer for setup work, especially for carving and fine-tuning the all-important nut. But feeling brave, I ordered a few blanks from Stewart MacDonald and tried making a nut from scratch.

    Numerous times, actually.

    The first attempt was, of course, an unmitigated disaster. The second one was a little better — I’d call it a mitigated disaster.

    Only a poor craftsmen blames his tools, so I blamed my tools. I sprung for Stew-Mac’s Essential Nut Making Tool Kit, with all the proper files, saws, feeler gauges, and a nifty little vise. And it actually did help — thanks to some great instructions from the ever-reliable Dan Erlewine, which you can find here. (Understand that my workbench skills are a joke. I’m the kind of guy who grabs a screwdriver to pound a nail rather than take 30 seconds to fetch the…whatever the hell you’re supposed to use.)

    Anyway, I saved a fortune! My new nut cost less than ten bucks — plus $200 in tools and about $2,000 in labor.

    Am I bitter? No way! I learned a ton, and the next time I need a nut, whether it’s made by me or someone competent, I’ll have a much better idea what to go for. I kept comparing it to making one’s own shoes — not something most of us are dumb enough to try, but man, you’d sure learn a few things about the contours of your feet!

    I’m not posting a pic of my work because it looks really nasty, and Gary Brawer might see it and laugh at me. But ugly as it looks, my third home-cut nut actually feels and sounds great. (BTW, I tried working with both real bone and the simulated stuff from Tusq. Both materials have their staunch advocates, but I can’t claim to perceive all that much difference in tone or workability.)

    Anyone else tried this at home? (I’m not talking to you, pro luthiers — I mean regular people!)